How to Move a Grill

Step-by-Step Instructions

1. 1
   Step 1

   Remove the Propane Tank

   The tank is usually placed underneath the grill, sitting on a shelf or attached to a holder. Before touching anything, make sure the propane tank is turned off and that the burner knobs are set to the "off" position as well. This step is important to make sure no gas is flowing.

   Once the gas is off, it's time to disconnect the hose that connects the tank to the grill. Carefully twist the hose fitting where it connects to the tank. Once it’s loose, gently pull the hose away from the tank. Now that the tank is free, lift it out of the grill and set it aside in a safe, upright position. Propane tanks are heavy, so use both hands and be careful not to drop it. 

2. 2
   Step 2

   Clean out the grill

   Start by finding the grease pan. It’s usually under the grill, and it catches all the drips from cooking. Carefully slide it out and dump the grease into a container or trash bag. Be careful—grease can be slippery, and you don’t want it spilling all over your hands. If the pan is really messy, give it a quick wipe with paper towels or a rag to make sure it’s clean enough for the move.

   Next, open the lid and check inside of the grill. Wipe down the grates and any surfaces where grease or crumbs might be hiding. If your grill has any loose ash or burnt bits, brush them out so they don’t shake loose during the move.

3. 3
   Step 3

   Remove any racks

   To remove the racks, open the grill lid and carefully lift them out one by one. Once all the racks are out, put them in a bag to keep them together. This way, you won’t have to search for them later. We recommend taking the racks out of the grill so they don’t shake around while you are moving.

4. 4
   Step 4

   Remove the grill and load it into the truck

   Now it’s time to move the grill! Grills can be heavy, so it’s always best to ask a friend for help. Stand on one side while your friend stands on the other. Make sure you both have a good grip before lifting. If your grill has wheels, tilt it carefully and roll it to the truck instead of carrying it.

   If you have a ramp, push the grill up slowly to avoid it rolling back down. No ramp? No problem! Just lift it together and place it gently onto the truck. Be careful not to bump it against anything on the way. Once it's safely in the truck, you're ready for the next step.

5. 5
   Step 5

   Strap down the grill

   Once the grill is on the truck, it’s time to make sure it stays in place. Use ratchet straps, to secure the grill to the moving truck. Wrap the straps around the grill and attach them to the wooden slats on the inside of the truck. Pull the strap until its tight and then synch it down. Be sure you don’t tighten the straps to the point you damage your grill! For extra protection, you can cover your grill will moving blankets or place cardboard under the metal parts of the ratchet straps that touch the grill so that it doesn’t get scratched up.

   Don’t Let Moving Your Grill Burn You Out!

   Leave the heavy lifting to TWO MEN AND A TRUCK®, the experts who know how to move it safely without a scratch. Whether it’s across the street or across the state, we’ve got you covered. Call now and let us handle the heat—your grill will thank you later!